SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSBMW2023X4 M COMPETITIONREPAIR AND DIAGNOSISGENERAL INFORMATIONOEM GENERAL INFORMATIONGENERAL ORPHAN DATA (2 OF 2)INSTALLING THE CENTER CONSOLE TRIM
2023 BMW X4 M Competition

Installing the center console trim

2023 BMW X4 M CompetitionSECTION Installing the center console trim
NOTE: RISK OF DAMAGE 
Careless handling of tools and sharp-edged components. 
Scratches, surface damage. 
  • Protect working area.
  • Handle tools and components carefully.
  • Check the clamps (arrows) for damage and replace if necessary.
    G14315650Courtesy of BMW OF NORTH AMERICA, INC.
  • Protect the gearshift lever against scratches.
  • Guide in center console trim (1) on the gearshift lever.
  • Connect respective connectors and lock.
  • Feed in the center console trim (1) in front and clip it in at the clamps (2).
    G14315649Courtesy of BMW OF NORTH AMERICA, INC.

    Installing the center console trim 

    NOTE: RISK OF DAMAGE 
    Careless handling of tools and sharp-edged components. 
    Scratches, surface damage. 
    • Protect working area.
    • Handle tools and components carefully.
  • Check the clamps (arrows) for damage and replace if necessary.
    G14315647Courtesy of BMW OF NORTH AMERICA, INC.
  • Attach the center console trim (1) at the front and engage at the clamps (2).
    G14315646Courtesy of BMW OF NORTH AMERICA, INC.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.