Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSBMW2023X4 M COMPETITIONREPAIR AND DIAGNOSIS (SINGLE PAGE)BODY & FRAMESUN ROOF/T-TOP/CONVERTIBLE TOPTECHNICAL DATA -- (F98)41 BODY TECHNICAL DATA4100 BODY
2023 BMW X4 M Competition
4100 Body
2023 BMW X4 M CompetitionSECTION 4100 Body
4100 TECHNICAL DATA OVERVIEW
| Filler S1 | ||
| Processing time 20°C | 90 min | |
| Processing time 30°C | 60 min | |
| Curing time 60°C | 60 min | |
| Storage | 15°C... 25°C | |
| Shelf life (observe expiration date on the cartridge | 12 Months | |
| Gap dimension hood to headlight | ||
| 1 hood; 2 headlight | a | 5.4 +1.8 -1.8 mm |
| Gap dimension side panel to front door | ||
| 1 Side panel; 2 front door | a | 3.8 +1 -1 mm |
| b | 0.5 +1.1 -1.1 mm | |
| Gap dimension front door to rear door | ||
| 1 front door; 2 rear door | a | 4.2 +1 -1 mm |
| b | 0 +1.9 -0.3 mm | |
| Gap dimension rear door to door sill trim panel | ||
| 1 rear door bumper strip; 2 door sill trim panel | a | 4.2 +1.5 -1.5 mm |
| b | 0 +1.4 -1.4 mm | |
| Gap dimension windshield to roof outer skin | ||
| 1 windshield; 2 roof outer skin | a | 4.3 +1 -1 mm |
| b | 2.5 +1.5 -1.5 mm | |
| Gap dimension hood to side panel | ||
| 1 hood; 2 side panel | a | 3.3 +1 -1 mm |
| b | 1.5 +1.6 -1.6 mm | |
| Gap dimension, hood to front outer bumper cover | ||
| 1 hood; 2 front bumper cover | a | 4.3 +1.5 -1.5 mm |
| b | 2.5 +1.5 -1.5 mm | |
| Gap dimension roof outer skin to rear spoiler | ||
| 1 Roof outer skin; 2 rear spoiler | a | 4.5 +1.6. -1.6 mm |
| b | 1.1 +1.6 -1.6 mm | |
| Gap dimension rear quarter panel to trunk lid | ||
| 1 rear quarter panel; 2 trunk lid | a | 3.4 +1.3 -1.3 mm |
| b | 1 +1.1 -1.1 mm | |
| Gap dimension, trunk lid to rear side bumper cover | ||
| 1 rear bumper cover; 2 trunk lid | a | 3.5 +1.6 -1.6 mm |
| b | 1.6 -1.8 -1.8 mm | |
| Gap dimension, trunk lid to rear center bumper cover | ||
| 1 trunk lid; 2 rear bumper panel | a | 5.0 +1.5-1.5 mm |
| Gap dimension rear door to rear quarter panel | ||
| 1 rear door; 2 rear quarter panel | a | 3.8 +1 -1 mm |
| b | 0 +1.9 -0.3 mm | |
| Gap dimension, rear quarter panel to top rear window | ||
| 1 rear quarter panel; 2 rear window | a | 3.2 +1.5 -1.5 mm |
| b | 6.4 +1.4 -1.4 mm | |
| Gap dimension, rear quarter panel to lower rear window | ||
| 1 rear quarter panel; 2 rear window | a | 3.2 +1.5 -1.5 mm |
| b | 4.0 +1.4 -1.4 mm | |
| Gap dimension, rear door to rear wheel arch trim | ||
| 1 rear door; 2 rear wheel arch trim | a | 4.0 +1.1 -1.1 mm |
| b | 1.0 +1.2 -1.2 mm | |
| Gap dimension rear door to door sill trim panel | ||
| 1 rear door bumper strip; 2 door sill trim panel | a | 4.2 +1.5 -1.5 mm |
| b | 4.9 +1.4 -1.4 mm | |
| Gap dimension front door to door sill trim panel | ||
| 1 front door bumper strip; 2 door sill trim panel | a | 4.2 +1.5 -1.5 mm |
| b | 4.9 +1.4 -1.4 mm | |
| Gap dimension front door to door sill trim panel | ||
| 1 front door bumper strip; 2 door sill trim panel | a | 4.2 +1.5 -1.5 mm |
| b | 4.5 +1.4 -1.4 mm | |
| Gap dimension, hood to front center bumper cover | ||
| 1 hood; 2 front bumper cover | a | 4.3 +1.5 -1.5 mm |
| b | 3.3 +1.5 -1.5 mm | |
| Gap dimension side panel to A-pillar | ||
| 1 side panel; 2 A-pillar | a | 2.6 +1.1 -1.1 mm |
| b | 0 +1.1 -1.1 mm | |
| Gap dimension roof outer skin to glass slide/tilt roof panel, front | ||
| Roof outer skin; 2 Glass slide/tilt roof panel, front | a | 0.6 +0.8 -0.8 mm |
| Gap dimension glass slide/tilt sunroof panel, rear, to roof outer skin | ||
| 1 Glass slide/tilt roof panel, rear; 2 roof outer skin | a | 0.6 +0.8 -0.8 mm |
| Tap dimension glass slide/tilt roof panel front to rear | ||
| 1 Glass slide/tilt roof panel, front; 2 glass slide/tilt roof panel, rear | a | 0.7 +0.8 -0.8 mm |
| Air drying time after the order | ||
| Betawipe 4800 | 2 min | |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.