Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
5413 Adhesive Specification
2023 BMW X4 M CompetitionSECTION 5413 Adhesive Specification
5413 TECHNICAL DATA OVERVIEW
| Adhesive bead of the side window | ||
| Width a | 8 +3 -1 mm | |
| Height b | 12 +1 -2 mm | |
| Processing time | max. 7 min | |
| Sika primer 206 | ||
| Protrusion of the glass activator track opposite the crimped adhesive bead | 1 mm... 2 mm | |
| Air drying time at over 15°C | 10 min | |
| Air drying time at under 15°C | 30 min | |
| Residual height of the adhesive bead | ||
| Residual height of the adhesive bead | max. 1 mm | |
| HS-AM multi-base filler VOC | ||
| Layer thickness | 30 μm... 40 μm | |
| Hardening time with infrared | 10 min | |
| Hardening time without infrared 60°C | 30 min | |
| Hardening time without infrared 20°C | 1 Tag | |
| C-nozzle | ||
| For windshields, rear windows, and body-specific side window glass | Diameter A | 7.5 +1 -1 mm |
| Height B | 13 +1 -1 mm | |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.