Installing the ACC sensor

2023 BMW X4 M CompetitionSECTION Installing the ACC sensor
  • Check ball hub (2)  for damage and, if necessary, replace it.
    G12676589Courtesy of BMW OF NORTH AMERICA, INC.
  • Check detents (2)  of radome (1)  on ACC sensor (3)  for damage.
    G12676590Courtesy of BMW OF NORTH AMERICA, INC.
  • Attach ACC sensor (2)  to the radome.
  • Connect connector (1)  to ACC sensor (2)  and lock it.
    G12676588Courtesy of BMW OF NORTH AMERICA, INC.
  • Engage ACC sensor (1)  with the radome on ball hub (2)  .
    G12676587Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.