Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSBMW2023X3 M BASEREPAIR AND DIAGNOSIS (SINGLE PAGE)COLLISIONGENERAL COLLISION INFORMATIONCOLLISION - BODY PANEL REPAIR (F97)41 14 WHEEL WELLS41 14 531 REPLACING THE CONNECTION, ENGINE MOUNT, SIDE FRAME, LEFT FRONT (LEFT FRONT WHEEL WELL REMOVED) (X3 M)REMOVING THE CONNECTION BETWEEN ENGINE MOUNT AND SIDE FRAME
2023 BMW X3 M Base
Removing The Connection Between Engine Mount And Side Frame
2023 BMW X3 M BaseSECTION Removing The Connection Between Engine Mount And Side Frame
- Perform a separating cut (1) according to the diagram on the component connection of the engine mount (2).
- Open the welded connections in area (1) and remove the connection of the engine mount (2). Release the welded connections using the file belt sander.
- Loosen welded connections in areas (1).
- Remove the welded connections in area (1) and remove the connecting plate (2).
- Open welded connections in the areas (1) and (2).
- Open the welded connections in areas (2) and remove the reinforcement (1).
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.