6131 Switch, Sensor

2023 BMW M8 2D ConvertibleSECTION 6131 Switch, Sensor
6131 TIGHTENING TORQUE OVERVIEW

Controller to GWS 
screw Tightening torque  1.8 Nm
GWS to center console trim 
screw Tightening torque  1.8 Nm
MFL switch 
Screw TS5x12 tightening torque  1.5 Nm
Roof function center (FZD) 
  Tightening torque  1.2 Nm
Shift paddle 
Screw TS5x12 Tightening torque  2 Nm
SPORT button 
Screw TS5x12 Tightening torque  2 Nm
Steering column switch cluster (SZL) to steering column 
Screw TS5x20 Tightening torque  3 Nm
Steering column switch cluster (SZL) to steering column 
Screw TS5x20 Tightening torque  3 Nm
Steering wheel decorative trim 
Screw TS5x12 tightening torque  1.5 Nm
Steering wheel heating button to the decorative trim/cover 
  tightening torque  2 Nm
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.