Install the BDC control unit

2023 BMW M4 BaseSECTION Install the BDC control unit
  • Feed the BDC control unit (2) into the holder (3) in the arrow direction.
  • Engage the BDC control unit (2) into the detent (1).
  • Connect all connectors and lock.
    G15340465Courtesy of BMW OF NORTH AMERICA, INC.
  • Feed in the cover (3) in the arrow direction and engage it into the detents (2).
  • Position the carpet (1).
    G15340466Courtesy of BMW OF NORTH AMERICA, INC.
  • Feed in the power distribution (2) upwards and engage it correctly into the detents (1).
G15340467Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up workΒ 

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.