Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSBMW2023M3 BASE, STANDARD TRANSREPAIR AND DIAGNOSISENGINE PERFORMANCEENGINE CONTROL SYSTEMSFUEL SYSTEM -- TIGHTENING TORQUES M3 (G80)13 53 FUEL INJECTORS, FUEL INJECTION PUMP, FUEL PRESSURE SENSOR (M3 BASE, M3 COMPETITION, M3 COMPETITION M XDRIVE, M3 CS)
2023 BMW M3 Base, Standard Trans
13 53 FUEL INJECTORS, FUEL INJECTION PUMP, FUEL PRESSURE SENSOR (M3 base, M3 Competition, M3 Competition M xDrive, M3 CS)
2023 BMW M3 Base, Standard TransSECTION 13 53 FUEL INJECTORS, FUEL INJECTION PUMP, FUEL PRESSURE SENSOR (M3 base, M3 Competition, M3 Competition M xDrive, M3 CS)
1353 TIGHTENING TORQUE OVERVIEW
| Fuel line to cylinder head cover | ||
| 6x18 | tightening torque | 7 Nm |
| Fuel low-pressure sensor on fuel supply line | ||
| Fuel low-pressure sensor | Tightening torque | 30 Nm |
| Ground cable to rail | ||
| M6 | tightening torque | 5 Nm |
| High pressure line between the rail and the high pressure pump | ||
| M14x1.5 | tightening torque | 33 Nm |
| High pressure pump to high pressure pump flange | ||
| M6x25 Replace screws |
Joining torque | 12 Nm |
| Tightening torque | 90° | |
| Rail pressure sensor to rail | ||
| Sensor | Tightening torque | 32.5 Nm |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.