Installing the left and right front undershield

2023 BMW 230iSECTION Installing the left and right front undershield
WARNING: This page is about a different car, the 2025 BMW M4, 2024 BMW M4, 2023 BMW M4, 2022 BMW M4, and 2021 BMW M4. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Perform the steps on the right and left side.

Installing the front undershield 

  • Insert the front undershield (1) and position it.
  • Tighten screws (arrows).
    TIGHTENING TORQUE SPECIFICATIONS

    Undershield 
    screw Tightening torque  2.6 Nm
    Plastic nut Tightening torque  2.6 Nm
    G14988787Courtesy of BMW OF NORTH AMERICA, INC.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.