Install service cap in trunk

2021 BMW i3 Range ExtenderSECTION Install service cap in trunk
  • Check the seal (1) and neoprene nuts (2) (arrows) for damage and replace as needed.
    G11145063Courtesy of BMW OF NORTH AMERICA, INC.
  • Install service cap.
NOTE: TECHNICAL INFORMATION 
The tightening torque must be observed for neoprene nuts, as otherwise the neoprene nuts will be damaged. Replace damaged neoprene nuts.
Damaged neoprene nuts can lead to rattling noise from the service cap.
G11145052Courtesy of BMW OF NORTH AMERICA, INC.
  • Tighten the neoprene nuts (arrows).
TIGHTENING TORQUES SPECIFICATIONS

Service cap in trunk
Neoprene nut Tightening torque  1 Nm
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.