Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Mount Door On Assembly Jig Rep-Rep-RAGRP41-4151X01 - V.1
Special tools required:
- 2 358 309
- 00 2 300
As a support for the repair work, the door can be mounted with the mounting 2 358 309 on the special tool 00 2 300 .
Follow operating instructions of the special tools!
Screw mounting (1) tightly to assembly jig (2).
Screw mounting (3) for the lower door hinge tightly to the mounting (1).
Secure mounting (4) for the upper door hinge loosely to the mounting (1).
Attach door to mounting (1) with the aid of a second person.
Adjust mounting (2) relative to the upper door hinge and screw tight.
Fix lower door hinge by means of retaining screw (3).
Position and tighten the mounting (4) for door stop on mounting and doorstop.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.