SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSBMW2021Z4 SDRIVE M40IREPAIR AND DIAGNOSISGENERAL INFORMATIONOEM GENERAL INFORMATIONGENERAL ORPHAN DATA (1 OF 2)(PARTIALLY INSTALLING THE FRONT WHEEL SPEED SENSOR)
2021 BMW Z4 sDrive M40i

(Partially installing the front wheel speed sensor)

2021 BMW Z4 sDrive M40iSECTION (Partially installing the front wheel speed sensor)
  • Position the wheel speed sensor on the swivel bearing.
  • Secure cable of wheel speed sensor to holder (1).
  • Replace the screw (2).

    Parts:  Screw

  • Tighten down screw (2).
(TIGHTENING TORQUES SPECIFICATION)

Wheel RPM sensor to swivel bearing 
M6
Replace screw.		 Tightening torque  12 Nm
G16620938Courtesy of BMW OF NORTH AMERICA, INC.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.