Installing the Receiver Audio Module (RAM)

2021 BMW Z4 sDrive M40iSECTION Installing the Receiver Audio Module (RAM)
  • Install and position the Receiver Audio Module (RAM) (2)  .
  • Tighten nuts (1)  .
    TIGHTENING TORQUE SPECIFICATION

    Amplifier/RAM to holder 
    M5 screw Tightening torque  3 Nm
    Nut Tightening torque  3 Nm
    G14207032Courtesy of BMW OF NORTH AMERICA, INC.
  • Connect connectors (1)  and lock.
    G14207031Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.