Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
2013 BMW 328xi 4D Sedan, Eng CD N26
Quick Lookups: Fluids
2013 BMW 328xi 4D Sedan, Eng CD N26SECTION Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Compressor Oil | 6.00 OZS. | 0.17 L | PAG 46 | S | |||
| Air Cond Refrigerant | 1.40 LBS. | 0.63 KG | R-134a | S | |||
| Brake Fluid | N/A | N/A | DOT 4 ESL (Extended System Life) Brake Fluid | S | |||
| Engine Coolant | N/A | N/A | Ethylene Glycol long-term Antifreeze | Having corrosion inhibitors that are compatible with aluminum radiators. | S | ||
| Engine Oil | 2.0L Eng | 5.30 QTS. | 5.01 L | CASTROL Syntec European Formula SAE 0W-30, MOBIL SAE 0W-40, PENNZOIL Platinum European Formula Ultra SAE 5W-30, VALVOLINE SynPower SAE 5W-30 | The choice of the right SAE grade is based on the climatic conditions in the region in which the vehicle is normally driven. BMW recommends BMW High Performance 5W-30 Synthetic Oil (BMW part number 07 51 0 017 866) for regular scheduled engine oil changes. | S | |
| Fuel Tank | 16.10 GALS. | 60.94 L | Includes: a reserve of 2.1 gal. | S | |||
| Windshield Washer Fluid | w/Headlamp Washers | 6.30 QTS. | 5.96 L | Fill with water and - if required - with a washer antifreeze (according to manufacturer's recommendations). Mix the washer fluid before adding it to the reservoir. | S | ||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.