Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSBMW2013128I 2D CONVERTIBLE, ENG CD N52, STANDARD TRANSREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT VARIANT/TRIMSECTION 14 (COLLISION - BODY PANEL REPAIR (E82))BODY PANEL REPAIR41 00... SAFETY AT WORKARC WELDING AND BRAZING
2013 BMW 128i 2D Convertible, Eng CD N52, Standard Trans
Arc Welding And Brazing
2013 BMW 128i 2D Convertible, Eng CD N52, Standard TransSECTION Arc Welding And Brazing
WARNING: This page is about a different variant/trim than selected.
IMPORTANT:
The extremely bright arc during welding may cause serious injury to the eyes if appropriate protective measures are not taken.
- Use a special welding screen for the relevant welding process (MAG or MIG).
- Partition off the work bays with beam protection screens.
- Use a welding-emissions extractor facility.
- The welder must wear protective clothing and gloves which are suitable for welding (i.e. flameproof).
- A fire extinguisher must be located within reach of the welding area.
- Do not carry out any welding work in the proximity of a fuel tank e.g. when it is installed.
- Note national regulations.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.