Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
1.0 General Information on High Temperature Multi-Purpose Grease
High temperature multi-purpose grease consists of a lithium complex soap in a mineral oil product with a selected combination of additives. Extremely fine soap is contained in the oil, and serves as the basic ingredient.
This lubricating grease possesses the following properties:
- Very good thermal resistance and penetration stability
The structure and consistency must be maintained over long service life with temperatures from -22°F to +302°F (-30°C to +150°C) in continuous operation and very high loads.
- Oxidation stability
A lubricating grease contains effective inhibitors (which limit or prevent chemical reactions) in order to stop oxidation at very high operating temperatures.
- Water resistance and corrosion inhibition
A high temperature multi-purpose grease is water resistant. At the same time lubricated parts are given maximum protection against rust by the corrosion inhibitors.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.