61 13... Inline connectors, 6-, 8-pin, System MQS

2013 BMW 128i 2D Convertible, Eng CD N52, Standard TransSECTION 61 13... Inline connectors, 6-, 8-pin, System MQS
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2016 BMW 328i xDrive, 2016 BMW 328d xDrive, 2015 BMW 328i xDrive, 2015 BMW 328d xDrive, and 2014 BMW 328i xDrive. However, it is still accessible from the selected car via links, so may be relevant.

Press lock (1) in direction of arrow and slide connector forward.

Fig 1: Pressing Lock
G10143402Courtesy of BMW OF NORTH AMERICA, INC.

Press locking hook (2) downward and slide lock (1) out.

Fig 2: Pressing Connector Locking Hook
G10143403Courtesy of BMW OF NORTH AMERICA, INC.

Press down retaining hook (1) with screwdriver and pull out cable with contact towards rear.

Fig 3: Pulling Out Cable With Contact Towards Rear
G10143404Courtesy of BMW OF NORTH AMERICA, INC.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.