Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
86 10... Disassembly of loading ramp frame/disassembly of rail, left/right
Disassembly of license plate mounting plate
REFER TO 86 10... DISASSEMBLY OF LICENSE PLATE
mounting plate.
Disassembly of pull rod
Release screws (1) of loading ramp frame (2) on cross-strut (3).
Installation
Tightening Torque,
Refer to TIGHTENING TORQUE 86 10 7AZ.
Release screws (1, 2) on left and right sides of loading ramp frame (3).
Installation
Use new self-locking nuts.
Tightening Torque,
Refer to TIGHTENING TORQUE 86 10 8AZ.
Release screws (1, 2, 3).
Installation
Use new self-locking nuts.
Tightening Torque,
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.