32 31... Normalization of electric steering column adjustment

2013 BMW 128i 2D Convertible, Eng CD N52, Standard TransSECTION 32 31... Normalization of electric steering column adjustment
WARNING: This page is about a different car, the 2010 BMW X6, 2009 BMW X6, and 2008 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Normalization must be carried out after the following work:
  • Removal or replacement of control panel in heater-A/C system or of steering column
  • Repair work to electric steering column adjustment
  • Coding/programming of IHKA control unit

Normalization of electric steering column adjustment is possible via the diagnosis system under the following path:

  • Diagnosis
  • Function selection
  • Service functions
  • Chassis
  • Electric steering column adjustment
Fig 1: Diagnosis Screen
G04740355Courtesy of BMW OF NORTH AMERICA, INC.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.