Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSBMW2011Z4 35I, STANDARDREPAIR AND DIAGNOSIS (SINGLE PAGE)ACCESSORIES & EQUIPMENTANTI-THEFT SYSTEMSGENERAL ELECTRICAL SYSTEM - TIGHTENING TORQUESSWITCH
2011 BMW Z4 35i, Standard
61 31 Switch
2011 BMW Z4 35i, StandardSECTION Switch
TIGHTENING TORQUE SPECIFICATION - SWITCH
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Ignition starter switch | E60/E61/E63/E64 | 0.4 Nm | ||
| 2AZ | Reversing light switch | E36/E38/E39/E46/E53/E60/E61/E63/E64/E81/E82/E83/E85/E86/E87/E88/E89/E90/E91/E92/E93 | M12 | 16.0 Nm | |
| 3AZ | Cover, gear selector switch | E70/E71/E72 | M4 | 2.0 Nm | |
| 4AZ | Gear selector switch | E70/E71/E72 | M5 | 5.0 Nm | |
| 5AZ | Controller | E70/E71/E72 | M4 | 1.5 Nm | |
| 6AZ | Gear selector switch | E60/E61/E63/E64/E89/E90 M3/E92 M3/E93 M3 | M6 | 7.5 Nm | |
| 7AZ | Emergency release to gear selector switch | E60/E61/E63/E64 | M4 | 1.6 Nm | |
| 8AZ | Switch cluster to steering column | E70/E71/E72/E81/E82/E87/E88/E89/E90/E91/E92/E93 | 5-7 Nm | ||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.