Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
51 31... Notes on window bonding: General
- It is possible to tow or drive without windscreen or rear window.
The windscreen, rear window and side windows are glued to the body. This bonding will increase the torsional rigidity of the vehicle. To obtain perfect bonding, comply with the installation procedure described in the following.
- The adhesive must be applied at room temperatures > 15 °C to avoid negatively affecting the bonded connection.
- An air humidity of < 30% significantly slows hardening.
- The window glass must be secured against slipping with yellow plastic adhesive tape (sourcing reference: BMW Parts Department) after being installed. The paint must be completely hardened after painting work.
- Always apply the adhesive in such a way as to achieve tension-free bonding!
Adjust the component and interior temperature accordingly.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.