SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSBMW2011X6 50IREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 562 (CODING AND PROGRAMMING - OVERVIEW)PROGMANSTARTING A PROGRAMMING OR CODING SESSION WITH PROGMANSTARTING A SESSION WITH PROGMANNOTES
2011 BMW X6 50i

Starting A Session With Progman: Notes

2011 BMW X6 50iSECTION Notes
WARNING: This page does not describe the selected car, but rather 333 other vehicles, including the 2007 BMW Z4, 2007 BMW X5, 2007 BMW X3, 2007 BMW M6, and 2007 BMW M5. However, it is still accessible from the selected car via links, so may be relevant.

Select "New Session"

Fig 1: Selecting New Session Button
G03397980Courtesy of BMW OF NORTH AMERICA, INC.

Select the desired interface

Select "Continue"

Fig 2: Display Interfaces Name, Version And IP Address
G03397981Courtesy of BMW OF NORTH AMERICA, INC.

Under "Description" enter information that will identify the vehicle to which the interface is connected (Ex. VIN or Model type, Service hat #, Vehicle color, Bay location, etc.)

Select "Continue"

Fig 3: Entering Information In "Description" About Vehicle To Which Interface Connected
G03397982Courtesy of BMW OF NORTH AMERICA, INC.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.