Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSBMW2011X6 35IREPAIR AND DIAGNOSISSUSPENSIONWHEEL ALIGNMENTSTEERING AND WHEEL ALIGNMENT - REPAIR
2011 BMW X6 35i
Steering And Wheel Alignment - Repair
2011 BMW X6 35iSECTION Steering And Wheel Alignment - Repair
- Electronic Chassis Alignment
- 32.... Overview of steering
- 32...... Overview of active front steering
- 32...... Overview of steering (interior)
- 32 00... Additional work for camber correction
- 31 00... Front axle + steering: wheel/chassis alignment check must be carried out after the following work
- 32 00... General chassis and suspension definitions
- 32 00... General information and definitions
- 32 00... Identification of suspension without label
- 32 00... Information on replacing steering gear after accident damage
- 32 00... Moving vehicle into design position
- 32 00... Moving vehicle into normal position
- 32 00... Performing rim runout compensation
- 00..... Raising vehicle with trolley jack
- 33 00... Rear axle: wheel/chassis alignment check must be carried out after the following work
- 00 Safety information for working on vehicles with automatic engine start-stop function (MSA)
- 32 00... Test conditions for chassis/wheel alignment check
- 32 00 150 KDS chassis/wheel alignment check with load up to design position
- 32 00 155 KDS chassis/wheel alignment check with ride-height measurement without load
- 32 00 601 Adjusting toe-in on front axle
- 32 00 620 Adjusting rear axle
- 32 10 005 Adjustment for active front steering
- 61 31 996 Carrying out steering angle sensor adjustment
- Mechanical Steering Gear
- Steering Gear With Servo Unit
- 32 13 006 Bleeding power steering (version with Dynamic Drive)
- 32 13 006 Bleeding power steering unit
- 32 13 060 Removing and installing hydraulic steering gear
- 32 13 065 Removing and installing/replacing hydraulic steering gear for active front steering
- 32 13 066 Replacing active front steering hydraulic steering gear
- Steering Arms, Tie Rods, Steering Damper
- Steering Column
- 32 31... Normalization of electric steering column adjustment
- 32 31 003 Removing and installing/replacing upper section of steering column trim
- 32 31 020 Removing and installing/replacing lower section of steering column trim
- 32 31 070 Removing and installing/replacing lower section of steering shaft
- 32 31 070 Removing and installing/replacing steering shaft lower section (N63)
- 32 31 082 Removing and installing/replacing steering angle sensor
- 32 31 092 Removing and installing/replacing steering column
- Steering Wheel
- Steering Wheel For Airbag
- Pump And Oil Supply
- 32 41... Instructions for removing and installing ear clips
- 32 41... Instructions for using special tool 32 4 000
- 32 41... Notes on hydraulic line with quick-connect coupling
- 32 41... Replacing level switch for Dynamic Drive fluid reservoir
- 32 41... Replacing pressure line for Dynamic Drive (N54)
- 32 41... Replacing pressure line for Dynamic Drive (N63)
- 32 41... Replacing pressure line for Dynamic Drive (part 1) (N54)
- 32 41... Replacing pressure line for Dynamic Drive (part 2) (N54)
- 32 41... Replacing return line for Dynamic Drive (N54)
- 32 41... Replacing return line for Dynamic Drive (N63)
- 32 41 033 Removing and installing/replacing power steering pump for power steering gear with active front steering (N54)
- 32 41 033 Removing and installing/replacing power steering pump for hydraulic steering box with active steering (N55)
- 32 41 033 Removing and installing power steering pump for power steering gear with active front steering (N63)
- 32 41 037 Removing and installing/replacing power steering pump for power steering gear with Dynamic Drive (N54)
- 32 41 037 Removing and installing/replacing power steering pump for power steering gear with Dynamic Drive (N63)
- 32 41 100 Removing and installing/replacing belt pulley on vane pump for power steering
- 32 41 250 Removing and installing/replacing fluid reservoir for power steering
- 32 41 311 Replacing intake pipe for hydraulic steering (N54/N55)
- 32 41 311 Replacing suction line for power steering (N63)
- 32 41 331 Replacing pressure line for power steering (N54)
- 32 41 331 Replacing pressure line for power steering (N63)
- 32 41 333 Replacing pressure line for Dynamic Drive (line part 1) (N63)
- 32 41 333 Replacing pressure line for Dynamic Drive (line part 2) (N63)
- 32 41 341 Replacing cooler return line for power steering (N54, N63)
- 32 41 351 Replacing return line for power steering (N62)
- 32 41 351 Replacing return line for hydraulic steering (N54, N55, N63)
- Electronic Power Steering
- Troubleshooting
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.