SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSBMW2011X6 35IREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 164 (BODY EQUIPMENT - REPAIR INSTRUCTIONS - X5 (4.4L))BMW EMBLEMS, MODEL EMBLEMS51 14 ... INSTRUCTIONS FOR ATTACHING NUMBER/LETTER DESIGNATION COMBINATIONREMOVING
2011 BMW X6 35i

51 14 ... Instructions for attaching number/letter designation combination: Removing

2011 BMW X6 35iSECTION Removing
WARNING: This page is about a different car, the 2003 BMW X5, 2002 BMW X5, 2001 BMW X5, and 2000 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

Coat nylon string or strong yarn with dishwashing liquid.

Cut through adhesive layer and remove model designation (1) from rear lid (2).

Remove remainder of adhesive layer with adhesive remover.

Fig 1: Removing Model Designation From Rear Lid
G03252730Courtesy of BMW OF NORTH AMERICA, INC.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.