Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
61 35 097 Removing and installing (replacing) control unit/module for seat heating (rear seat with 3rd seat row) on left or right
Necessary preliminary tasks
- Disconnect BATTERY NEGATIVE LEAD .
Disconnect plug connection (1).
Fold rear seat forwards and lever retaining tab (2) with a suitable tool (3) in direction of arrow.
Remove control unit/module for seat heating (4) in direction of arrow.
Installation:
Retaining tab (2) must be returned to its initial position.
Retaining journal (6) must not be damaged.
Feed retaining journal (6) first into seat backrest frame (5).
Make sure control unit/module for seat heating (4) is correctly engaged on retaining tab (2).
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.