Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Switching Fog Lights ON/OFF
The fog lights can be switched on under the following conditions:
- Terminal 15 ON and
- Light switch in position 1 side lights or position 2 low-beam headlights ON or automatic driving lights control and
- Fog lights button pressed.
The fog lights are switched off by pressing the button again. When switched on, the fog lights can also be switched off by turning the light switch to the "Lights OFF" position.
The fog lights can be switched on again when the light switch is set to the side lights, low beam or automatic driving lights control position.
A H-8 35 W bulb is fitted in each fog light.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.