Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Magnetic TORX Socket (04 26 10)
Reference number: 04 26 10
MAGNETIC TORX SOCKET
TECHNICAL SERVICE BULLETIN
| BMW: | All |
| GROUP: | Tools and Equipment |
SUBJECT
Magnetic Torx Socket
SITUATION
Distribution of the following tool will be through the Automatic Tool Shipment Program. Additional tools may be purchased through your Regional Distribution Center (RDC).
Magnetic Torx Socket
Order P/N 83 30 0 496 931
6 Digit P/N 540 250
The magnetic torx socket is used to remove and replace the mounting screws on the sunroof. The magnet prevents the screw from falling into the sunroof. The tool is a TX25 torx that is 150 mm long.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.