Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
61 13... Removing and installing/replacing fibre-optic cable connector
Necessary preliminary tasks
- Remove SIDE SECTION ON REAR SEAT BACKREST on left.
Unlock catch (1) and remove deflection roller (2).
Remove fibre optic cable (3) from deflection roller (2).
Unlock catch on fibre-optic cable connector (5) with a suitable tool (4).
Remove fibre-optic cable connector (5) in direction of arrow from deflection roller (2).
Carefully raise cover cap (1) with a suitable tool and remove from fibre-optic cable connector (2).
Carefully raise lock (1) and pull fibre optic cable (2) out of fibre optic cable plug (3).
Installation:
Make sure fibre-optic cable (2) is correctly seated and engaged in fibre-optic cable connector (3).
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.