61 13... Special tools for wiring harness repairs

2011 BMW 335is 2D Convertible, Automatic DCTSECTION 61 13... Special tools for wiring harness repairs

Special tools required: 

Release and press-out tool 

  • Special tool 61 0 300
  • Fig 1: Identifying Special Tool Set 61 0 300
    G09863355Courtesy of BMW OF NORTH AMERICA, INC.

Handling: 

Handling: 

Crimping stop parts (small contacts) 

Crimping stop parts (large contacts) 

  • Special tool 61 0 200 (crimping set)
  • Special tool 61 0 210 (matrix set
  • Special tool 61 0 220 (matrix set SLK 2.8)
  • Special tool 61 0 230 (matrix set MAK 8/DFK4)
  • Fig 4: Identifying Tools For Crimping Stop Parts
    G09863358Courtesy of BMW OF NORTH AMERICA, INC.

Crimping antenna elbow plugs 

Handling: 

  • Antenna elbow plug on radio receiver
    Fig 5: Identifying Matrix And Pliers
    G09863359Courtesy of BMW OF NORTH AMERICA, INC.

Repair kit for ignition cables and for crimping fan connector receptacles 4 mm  2 

  • Special tool12 1 080

Handling: 

Repairing ribbon cables 

  • Special tool61 1 190

Handling: 

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.