Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Engine start
The engine start is carried out on vehicles with manual transmission in the following conditions regardless of the switch-on requester:
- Clutch pedal is pressed.
The engine start is carried out on vehicles with automatic transmission in the following conditions:
- Brake pedal is released.
On vehicles with automatic transmission the brake pedal can establish readiness for drive off and start the engine.
- Operate brake pedal strongly
- Release brake pedal a little
- Engine is started.
On vehicles with the "Automatic Hold" function the engine is only started after operation of the accelerator pedal.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.