Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSBMW2011135I 2D CONVERTIBLE, AUTOMATIC DCTREPAIR AND DIAGNOSISACCESSORIES & EQUIPMENTINTERIOR/EXTERIOR TRIMBODY EQUIPMENT - REPAIRGENERAL51 00... OVERVIEW OF CONSUMABLES
2011 BMW 135i 2D Convertible, Automatic DCT
51 00... Overview of consumables
2011 BMW 135i 2D Convertible, Automatic DCTSECTION 51 00... Overview of consumables
| Designation, repair instructions | Designation | Part number | Remarks |
|---|---|---|---|
| Cleaning agent R2 | Cleaning agent R2 | 83 19 0 417 324 | 500 ml |
| Lubricants G13 | Lubricants G13 | 83 23 0 441 032 | 900 ml/NOTES |
| Sika Activator 205 | Aktivator 205 | 83 19 0 030 155 | 250 ml |
| Yellow plastic adhesive tape | Adhesive tape | 83 19 9 410 979 | A = 66 mm; B = 50 mm |
| Double-sided adhesive tape | Adhesive tape | 54 11 2 290 978 | L = 50 mm/W = 12 mm |
| Masking tape | Masking tape | 81 22 9 400 181 | L = 50 mm/W = 19 mm |
| Masking tape | Masking tape | 81 22 9 400 388 | L = 50 mm/W = 30 mm |
| Eraser disk | Scotch Brite eraser disk | 51 91 0 402 946 | with shaft |
| Cutting cord | Cutting cord | 81 43 2 344 272 | NOTES |
| Adhesive set K6 | Adhesive set K6 | 83 19 2 317 925 | |
| Profile rubber adhesive | 83 19 2 232 322 | ||
| Set of felt pads | Set of felt pads | 51 45 2 353 024 |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.