Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
61 13... Plug Housing, LCC Contact (Load Current Contact)
Special tools required:
- 61 0 317
Socket housing:
Press lock (1) with suitable tool (2) in direction of arrow out of socket housing (3).
Pull lock (1) out of socket housing (2).
Insert special tool 61 0 317 into socket housing (1) and pull out lead with LCC contact (2) in direction of arrow.
Pin housing:
Unlock locking slide (1) of pin housing (2) with suitable tool (3) in direction of arrow.
Insert special tool 61 0 317 into pin housing (1) and pull out lead with LCC contact (2) in direction of arrow.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.