Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSBMW2010M5 (E60) V10-5.0L (S85)REPAIR AND DIAGNOSISA L L DIAGNOSTIC TROUBLE CODES ( DTC )TESTING AND INSPECTIONP CODE CHARTSP0010
2010 BMW M5 (E60) V10-5.0L (S85)
P0010
2010 BMW M5 (E60) V10-5.0L (S85)SECTION P0010
2763 - P0010
Information saved in
DME
Fault code
2763 - P0010
Fault text
Bank 1 intake camshaft VANOS valve
Fault description
Condition for fault identification
Test condition:
Valve triggered
Terminal condition: Terminal 87 on
Voltage condition:
ub > K_ED_PlusMin
Condition for fault memory entry
Driver diagnosis ATIC35
(current too low with valve on)
Action in service
1. Check plug and wiring harness to Bank 1 VANOS EV
2. Check valve and replace as indicated
Fault effect and breakdown warning
Torque reduction / deterioration of emissions quality
Driver information
Warning light:
No
Service instruction
none
Information saved in
DME
Fault code
2763 - P0010
Fault text
Bank 1 intake camshaft VANOS valve
Fault description
Condition for fault identification
Test condition:
Valve triggered
Terminal condition: Terminal 87 on
Voltage condition:
ub > K_ED_PlusMin
Condition for fault memory entry
Driver diagnosis ATIC35
(current too low with valve on)
Action in service
1. Check plug and wiring harness to Bank 1 VANOS EV
2. Check valve and replace as indicated
Fault effect and breakdown warning
Torque reduction / deterioration of emissions quality
Driver information
Warning light:
No
Service instruction
none
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.