Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
61 31 011 Removing and installing/replacing volute spring cassette (from 09/2005)
2010 BMW 550i StandardSECTION 61 31 011 Removing and installing/replacing volute spring cassette (from 09/2005)
WARNING:
Move wheels into straight-ahead position and do not alter this position during the repair work.
Necessary preliminary tasks:
- Disconnect battery negative lead .
- Remove airbag unit . See STEERING WHEEL FOR AIRBAG .
- Remove steering wheel . See STEERING WHEEL FOR AIRBAG .
- Remove front section of steering column trim . See 32 31 010 REMOVING AND INSTALLING/REPLACING FRONT SECTION OF STEERING COLUMN COVER .
- Remove lower section of steering column trim . See 32 31 020 REMOVING AND INSTALLING / REPLACING LOWER SECTION OF STEERING COLUMN TRIM .
- Remove cruise control switch .
- Remove windshield wiper switch .
Release screws (1).
Unlock catches (1) and remove volute spring cassette (2) in direction of arrow from fixture for steering column switch (3).
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.