Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
66 54 001 Adjusting night vision camera
Vertical adjustment can only be carried out with the BMW diagnosis system:
- Service functions
- -> Body
- -> Night vision
- -> Night vision camera
- -> Vertical adjustment
For further information on the night vision system, refer to SBT on the subject of "NIGHT VISION ".
Necessary preliminary tasks:
- Remove grille in bumper trim on left. See 51 11 180 REMOVING AND INSTALLING/REPLACING TRIM GRILLE IN BUMPER TRIM (FROM 03/2007) .
A = 1.5 m
Align a suitable straight object (2), e.g. a spirit level, horizontally on headlight aiming device.
Slowly carry out axial adjustment of night vision camera at adjusting screw (3).
If necessary, align the picture of the night vision camera with aid of a second person.
Top edge (A) must be aligned parallel to top edge of screen (B).
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.