61 00... Diagnosis for Condition Based Service: Notes

2010 BMW 128i 2D Convertible, N51, AutomaticSECTION Notes
NOTE: Red symbol for pre-delivery check

The vehicle is coded at the end of the assembly line so that the red symbol for the pre-delivery check is shown in the Next Service display (same symbol as vehicle check).

The symbol is a reminder to the Service staff that the predelivery check has not yet been carried out on this car.

NOTE: Do not carry out a reset.

Do notΒ  confuse this function with the "Vehicle check" maintenance scope.

Do not carry out a reset via the instrument cluster.

Fig 1: Screen Display - Vehicle Check
G06177512Courtesy of BMW OF NORTH AMERICA, INC.

When carrying out the pre-delivery check with the "TRANSPORT MODE/PRE-DELIVERY CHECKΒ " service function:

The symbol is automatically removed from the display after the service function has been executed.

Fig 2: Screen Display - Service Function
G06177513Courtesy of BMW OF NORTH AMERICA, INC.
SERVICE FUNCTION TABLE

Key Explanation Key Explanation
1 Function and component selection 2 Service functions
3 Maintenance 4 Transport Mode/Pre-delivery check
5 CBS Correction Tester Data 6 Reset CBS Condition Based Service
7 CBS Correction Vehicle Data - -

4 service functions are available in the BMW diagnosis system for maintenance:

  • Transport Mode/Pre-delivery check
  • CBS Correction Tester Data
  • Reset CBS
  • CBS Correction Vehicle Data
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.