Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSBMW2009Z4 35I, AUTOMATIC DCTREPAIR AND DIAGNOSISENGINE MECHANICALMECHANICALENGINE AND TRANSMISSION MOUNTING - TIGHTENING TORQUES (N54)ENGINE MOUNTING22 11 ENGINE MOUNTING
2009 BMW Z4 35i, Automatic DCT
22 11 Engine mounting
2009 BMW Z4 35i, Automatic DCTSECTION 22 11 Engine mounting
TIGHTENING TORQUE SPECIFICATION - ENGINE MOUNTING
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Engine mount to front axle support | E52/E85/E86 | 42 Nm | ||
| E65/E66/E67 | M8-8 | 19 Nm | ||
| E60/E61/E63/E64/E83 | M8-8 | 21 Nm | ||
| E53 | M8 - 10.9 | 30 Nm | ||
| E87/E90/E91/E92/E93/E70/E71/E83/E81/E82/E88/E89/E84 | M8 10.9 | 28 Nm | ||
| E70/E71/E72/E83/E84/E90/E91/E92/E93 | M10 | 38 Nm | ||
| E92/E90/S65 | M10 | 56 Nm | ||
| 2AZ Engine mount to engine support arm | E60/E61/E63/E64/E65/E66/E67/E53/E83/E87/E90/E91/E92/E93/E70/E71/E81/E82/E88/E89/E84 | M10 10.9 | 56 Nm | |
| E65/E66/E67 | M12 10.9 | 100 Nm | ||
| E70/E71/E72/E83/E84/E90/E91/E92/E93 | M12 | 68 Nm | ||
| E85/E86/E52 | 42 Nm | |||
| 3AZ Engine support arm to engine | E60/E61/E63/E64/E65/E66/E67/E70/E71/E72/E81/E82/E83/E84/E87/E88/E89/E90/E91/E92/E93 | M10 8.8 | 38 Nm | |
| N51/N52/N52K/N53 | M12 | Aluminium bolts must be replaced | ||
| 1. Jointing torque | 25 Nm | |||
| 2. Angle of rotation | 105 ° | |||
| E60/E61/E65/E66/E67 | M8 8.8 | 19 Nm | ||
| E85/E83 | M8 8.8 | 21 Nm | ||
| E70/E71 | M10 10.9 | 56 Nm | ||
| E53 (N62/M54) | 38 Nm | |||
| E53 (M57) | 65 Nm | |||
| N54/N55 | M12 | Engine N54/55 only | 66 Nm | |
| N42 | M10 8.8 | 38 Nm | ||
| 4AZ Engine mount to console | E65/E60/E61/E63/E64 | M8 8.8 | 21 Nm | |
| 5AZ Console to front axle support | E65/E60/E61/E63/E64 | M8-8 | 21 Nm | |
| 6AZ Vibration absorber to engine support | E70/E71 | 19 Nm | ||
| 7AZ Reinforcement plate to front axle support | E90/E91/E92 | M8 | 19 Nm | |
| 8AZ Support angle to engine mount or front axle support | E90/E91/E92 | M8 | 19 Nm |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.