Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSBMW2009X3 STANDARDREPAIR AND DIAGNOSISBODY & FRAMETOWING SYSTEMSTRAILERS - REPAIR10 LOADING PLATFORM86 10 ... REMOVING PLASTIC BUSH/METAL BUSH

2009 BMW X3 Standard

86 10 ... Removing Plastic Bush/Metal Bush

2009 BMW X3 StandardSECTION 86 10 ... Removing Plastic Bush/Metal Bush

Release countersunk metal screws (1).

Fig 1: Identifying Countersunk Metal Screws

G04786703

Courtesy of BMW OF NORTH AMERICA, INC.

Lever out plastic bush/metal bush (1) with a screwdriver.

Fig 2: Identifying Plastic Bush/Metal Bush

G04786704

Courtesy of BMW OF NORTH AMERICA, INC.

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.