Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
67 11 555 Removing and installing/replacing servodrive for tank filler flap
Necessary preliminary tasks:
- Remove Right Luggage Compartment Wheel Arch Trim, see 51 47 161 REMOVING AND INSTALLING/REPLACING RIGHT LUGGAGE COMPARTMENT WHEEL ARCH TRIM .
Unclip emergency actuator (1) on emergency actuator pull strap (2).
Feed out emergency actuator pull strap (2) through opening (3).
Slacken screws (4) and feed servodrive for tank filler flap (5) towards rear out of retaining plate.
If necessary, carry out adjustment of servodrive for tank filler flap (5) via elongated holes of retaining plate. It must be possible to lock or unlock the fuel filler flap completely.
Disconnect associated plug connection and remove servodrive for tank filler flap (5).
Installation:
Insert servodrive for tank filler flap (1) in direction of arrow into gaiter (2).
Replacement:
Unhook emergency actuator pull strap (1) from clip (2) and remove from locking pin (3) of servodrive for fuel filler flap (4).
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.