SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSBMW2009550I STANDARD, GS653BZREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 2345 (BODY EQUIPMENT - REPAIR - F01/F02)BMW EMBLEMS, MODEL EMBLEMS51 14... INSTRUCTIONS FOR ATTACHING NUMBER/LETTER DESIGNATION COMBINATIONREMOVING
2009 BMW 550i Standard, GS653BZ

51 14... Instructions for attaching number/letter designation combination: Removing

2009 BMW 550i Standard, GS653BZSECTION Removing
WARNING: This page does not describe the selected car, but rather 31 other vehicles, including the 2015 BMW Alpina B7L, 2015 BMW Alpina B7, 2015 BMW 750i, 2015 BMW 750Li, and 2015 BMW 740i. However, it is still accessible from the selected car via links, so may be relevant.

Coat nylon string or strong yarn with tensides (e.g. washing-up liquid).

Cut through adhesive layer and remove model designation (1) from rear lid (2).

Remove remainder of adhesive layer with adhesive remover.

Fig 1: Identifying Model Designation And Rear Lid
G06885375Courtesy of BMW OF NORTH AMERICA, INC.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.