Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Check Control
If a fault develops in the PDC, the function LED in the PDC button flashes.
In this situation, PDC cannot be switched on.
At the same time, a Check-Control message is displayed in the following form
- Symbol in the LCD display in the instrument cluster
- The following text appears in the status line of the Central Information Display:
"PDC failure!"
In the menu "BMW Service", the following text can be called up in the submenu "Check-Control messages":
"Park Distance Control
No acoustic warning available for Park Distance Control (PDC).
Have the problem checked by BMW Service as soon as possible."
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.