Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
61 31 287 Removing and installing/replacing dynamic driving switch (Sport button)
Special tools required:
Necessary preliminary tasks:
- Remove TRIM FOR PRESELECTOR LEVER. See 51 16 210 REMOVING AND INSTALLING/REPLACING TRIM FOR PRESELECTOR LEVER (FROM 03/2007)
Release screws (1).
If necessary, lever out actuation trim (4) with special tool 64 1 020 and remove.
Remove driving dynamics switch (2) in direction of arrow from finisher for preselector lever (3).
Version with automatic sport transmission:
Unlock catches (1).
Remove Sport button (2) in direction of arrow from trim for preselector lever (3).
Installation:
Make sure Sport button (2) is correctly seated on trim for preselector lever (3).
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.