Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSBMW2008M5 (E60) V10-5.0L (S85)REPAIR AND DIAGNOSISPOWERTRAIN MANAGEMENTCOMPUTERS AND CONTROL SYSTEMSDATA LINK CONNECTORTECHNICAL SERVICE BULLETINSCOMPUTERS/CONTROLS - OBD SOCKET COVER MISSING
2008 BMW M5 (E60) V10-5.0L (S85)
Computers/Controls - OBD Socket Cover Missing
2008 BMW M5 (E60) V10-5.0L (S85)SECTION Computers/Controls - OBD Socket Cover Missing
SI B 61 09 07
General Electrical Systems
August 2007
Technical Service
SUBJECT
OBD Socket Housing Cover Missing
MODEL
E90, E91, E92, E93 (3 Series) vehicles produced from 9/07
E60, E61 (5 Series) vehicles produced from 3/07
E65, E66 (7 Series) vehicles produced from 9/07
E83 (X3) vehicles produced from 3/07
SITUATION
The housing cover of the OBD socket is missing.
CAUSE
The housing cover has been discontinued
PROCEDURE
Do not install parts.
The housing cover of the OBD socket has been discontinued due to legal regulations in the USA.
It is no longer necessary to install the socket housing.
WARRANTY INFORMATION
For information only
General Electrical Systems
August 2007
Technical Service
SUBJECT
OBD Socket Housing Cover Missing
MODEL
E90, E91, E92, E93 (3 Series) vehicles produced from 9/07
E60, E61 (5 Series) vehicles produced from 3/07
E65, E66 (7 Series) vehicles produced from 9/07
E83 (X3) vehicles produced from 3/07
SITUATION
The housing cover of the OBD socket is missing.
CAUSE
The housing cover has been discontinued
PROCEDURE
Do not install parts.
The housing cover of the OBD socket has been discontinued due to legal regulations in the USA.
It is no longer necessary to install the socket housing.
WARRANTY INFORMATION
For information only
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.