Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Vehicle Check Service
2008 BMW M5 (E60) V10-5.0L (S85)SECTION Vehicle Check Service
Vehicle Check Service
As previously explained, Condition Based Service will determine which of the possible maintenance services listed are required for a particular service visit.
At Every 2nd Engine Oil Change
- check operation of horn, headlight flasher and hazard warning lights
- check instrument and control lighting, and heater/AC blower
- check lighting system: turn signals, back-up, license plate, interior (incl. map reading lights), glovebox, flashlight, luggage area lights
- safety belts: check condition and function
- check windshield wiper and jet positions
- body: check for corrosion
- tires: check tread depth, wear pattern, outer condition, inflation pressure (incl. spare)
- battery: check state of charge ("magic eye") and recharge if required
- power steering reservoir: check fluid level
- visually inspect all SRS airbag units for torn covers, obvious damage or attachment of stickers
- function of rear-view mirrors
- coolant: check fluid level and concentration
- windshield washer system: check fluid level and protection level
- brake system connections and lines: check for leaks, damage and correct positioning
- underbody: all visible parts md. transmission, rear axle, fuel tank, exhaust system: check for damage, leaks, corrosion
- steering components: check for clearance, leaks, damage and wear
- parking brake: check function
- Final Inspection: road test with check of
- brakes
- steering
- shock absorbers (external)
- transmission
As previously explained, Condition Based Service will determine which of the possible maintenance services listed are required for a particular service visit.
At Every 2nd Engine Oil Change
- check operation of horn, headlight flasher and hazard warning lights
- check instrument and control lighting, and heater/AC blower
- check lighting system: turn signals, back-up, license plate, interior (incl. map reading lights), glovebox, flashlight, luggage area lights
- safety belts: check condition and function
- check windshield wiper and jet positions
- body: check for corrosion
- tires: check tread depth, wear pattern, outer condition, inflation pressure (incl. spare)
- battery: check state of charge ("magic eye") and recharge if required
- power steering reservoir: check fluid level
- visually inspect all SRS airbag units for torn covers, obvious damage or attachment of stickers
- function of rear-view mirrors
- coolant: check fluid level and concentration
- windshield washer system: check fluid level and protection level
- brake system connections and lines: check for leaks, damage and correct positioning
- underbody: all visible parts md. transmission, rear axle, fuel tank, exhaust system: check for damage, leaks, corrosion
- steering components: check for clearance, leaks, damage and wear
- parking brake: check function
- Final Inspection: road test with check of
- brakes
- steering
- shock absorbers (external)
- transmission
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.