Removing and Installing/Replacing Footwell Light

2008 BMW M5 (E60) V10-5.0L (S85)SECTION Removing and Installing/Replacing Footwell Light



63 31 020 - Removing and installing/replacing footwell light





Special tools required:
- 64 1 020 64 1 020 Release Hook





Important!
Follow instructions for handling light bulbs (interior lights) Instructions for Replacing Light Bulbs (Interior Lights).

Replacement:

If necessary, remove bulb.





In footwell:

Lever out footwell light (1) with special tool 64 1 020 64 1 020 Release Hook as illustrated.

Disconnect associated plug connection and remove footwell light (1).

Replacement:

Note type of bulb Interior Lights.





On underside of door:

Lever out footwell light (1) with special tool 64 1 020 64 1 020 Release Hook as illustrated.

Disconnect associated plug connection and remove footwell light (1).

Replacement:

Note type of bulb Interior Lights.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.