SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSBMW2007530XI 4D SEDAN, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1451 (GENERAL ELECTRICAL SYSTEM - REPAIR)13 PLUG CONNECTION, TERMINAL, FUSE BOX61 13... PLUG HOUSING, LCC CONTACT (LOAD CURRENT CONTACT)
2007 BMW 530xi 4D Sedan, Standard

61 13... Plug Housing, LCC Contact (Load Current Contact)

2007 BMW 530xi 4D Sedan, StandardSECTION 61 13... Plug Housing, LCC Contact (Load Current Contact)
WARNING: This page is about a different car, the 2010 BMW X5, 2009 BMW X5, 2008 BMW X5, and 2007 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required: 

  • 61 0 317 

Socket housing: 

Press lock (1) with suitable tool (2) in direction of arrow out of socket housing (3).

Fig 1: Pressing Lock Out Of Socket Housing
G04753330Courtesy of BMW OF NORTH AMERICA, INC.

Pull lock (1) out of socket housing (2).

Fig 2: Pulling Lock Out Of Socket Housing
G04753331Courtesy of BMW OF NORTH AMERICA, INC.

Insert special tool 61 0 317  into socket housing (1) and pull out lead with LCC contact (2) in direction of arrow.

Fig 3: Pulling Out Lead With LCC Contact
G04753332Courtesy of BMW OF NORTH AMERICA, INC.

Pin housing: 

Unlock locking slide (1) of pin housing (2) with suitable tool (3) in direction of arrow.

Fig 4: Unlocking Locking Slide Of Pin Housing
G04753333Courtesy of BMW OF NORTH AMERICA, INC.

Insert special tool 61 0 317  into pin housing (1) and pull out lead with LCC contact (2) in direction of arrow.

Fig 5: Pulling Out Lead With LCC Contact
G04753334Courtesy of BMW OF NORTH AMERICA, INC.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.