SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSBMW2006760LIREPAIR AND DIAGNOSISGENERAL INFORMATIONRESET PROCEDURESCIP- CODING, INDIVIDUALIZATION, PROGRAMMING - OVERVIEWCIP - CODING, INDIVIDUALIZATION, PROGRAMMINGPROGRAMMINGPROGRAM START
2006 BMW 760Li

Program Start

2006 BMW 760LiSECTION Program Start

Using DISplus or GT1 with the diagnostic head connected to the vehicle, select "Coding/ Programming" from the start mask.

When the program is started for the first time after a CD installation, there is a longer wait time (approx. 90 seconds).

Fig 1: Selecting Coding/Programming From Start Mask
G03396858Courtesy of BMW OF NORTH AMERICA, INC.
  • Start CIP by selecting "8 CIP"  , then press the forward arrow. The initial CIP screen is then displayed.
    Fig 2: Displaying CIP Screen
    G03396859Courtesy of BMW OF NORTH AMERICA, INC.
NOTE: After startup, CIP determines the vehicle order (VO) previously known as the Central Coding Key (ZCS) and records which control modules are installed in the vehicle. The vehicle order is not displayed on the screen.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.