SYS.OK|MANUAL.DB● LIVE
2006 BMW 325Ci 2D Convertible, M56

Quick Lookups: Fluids

2006 BMW 325Ci 2D Convertible, M56SECTION Fluids
FLUID CAPACITIES
Fluid Type Application Standard Metric Fluid Spec Note S/H
Air Cond Compressor Oil 5.00 OZS. 0.14 L PAG 46 S
Air Cond Refrigerant 1.63 LBS. 0.73 KG R-134a For further details see "Air conditioner specification label". S
Automatic Transmission Fluid 4.20 QTS. 3.97 L TEXACO ETL-7045 or DEXRON III Check transmission oil pan for correct fluid type. S
Brake Fluid N/A N/A DOT 4 ESL (Extended System Life) Brake Fluid S
Engine Coolant 8.87 QTS. 8.39 L Ethylene Glycol long-term Antifreeze Having corrosion inhibitors that are compatible with aluminum radiators. S
Engine Oil w/Filter 6.90 QTS. 6.52 L BMW High Performance Synthetic Engine Oil, SAE 5W-40 or 5W-30 Part No. 07 51 0 017 866. S
Fuel Tank 16.60 GALS. 62.83 L S
Manual Transmission Fluid 2.50 PTS. 1.18 L Manual Transmission Fluild LT3 (MTF LT3) All vehicles equipped with a manual transmission and the N52, N54 engines require the MTFLT-3 long-term fluid. Refer to label on Transmission, if label is missing enter VIN number in EPC to acquire a new label with fluid description. MTF-LT-3 BMW P/N 22 0 409 878. No oil change required for the entire service life of these transmissions. S
Power Steering Fluid N/A N/A BMW Automatic Transmission Fluid (BMW Part No. 81 22 9 400 272) or PENTOSIN CHF 11S Fluid (BMW Part No. 83 29 0 429 576) The hydraulic fluid reservoirs and/or the reservoirs cap are marked to show which type of oil/fluid should be used; BMW Automatic Transmission Fluid or PENTOSIN CHF 11S. S
Windshield Washer Fluid w/Headlamp Washer 5.60 QTS. 5.29 L Fill with water and - if required - with a washer antifreeze (according to manufacturer's recommendations). S
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.