Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSBMW2004320I (E46) (CANADA) L6-2.2L M54REPAIR AND DIAGNOSISMAINTENANCEWHEELS AND TIRESSPECIFICATIONSMECHANICAL SPECIFICATIONSTIGHTENING TORQUE
2004 BMW 320i (E46) (CANADA) L6-2.2L M54
Tightening Torque
2004 BMW 320i (E46) (CANADA) L6-2.2L M54SECTION Tightening Torque
36
Wheel Rims
Wheel cover on disc wheel bolts coated with blue Loctite No.243 9 Nm
Valve on disc wheel (RDC) 3.5 Nm
Wheel electronics (RDC) on valve 3.5 Nm
Tires
Control head to M-Mobility system 15 Nm
Control head to Sealant bottle 2.4 Nm
Wheel Rims
Wheel cover on disc wheel bolts coated with blue Loctite No.243 9 Nm
Valve on disc wheel (RDC) 3.5 Nm
Wheel electronics (RDC) on valve 3.5 Nm
Tires
Control head to M-Mobility system 15 Nm
Control head to Sealant bottle 2.4 Nm
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.