Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Wheel Alignment Specifications: E52
2001 BMW Z8SECTION E52
WHEEL ALIGNMENT SPECIFICATIONS (Z8)
| Application | Preferred | Range | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Total Toe | ||||||||||
| Front | .13° | .03 To .23° | ||||||||
| Rear | .4° | .23 To .57° | ||||||||
| Camber | ||||||||||
| Front (1) | -.5° | -1 To 0° | ||||||||
| Rear (2) | ||||||||||
| Alignment Check | -1.5° | -1.83 To -1.17° | ||||||||
| Adjustment | -1.45° | -1.53 To -1.37° | ||||||||
| Track Differential Angle With 20° Lock On Inside Wheel (3) | -1.92° | -2.42 To -1.42° | ||||||||
| Caster (3) | ||||||||||
| With -10 To 10° Wheel Lock | 6.42° | 5.92 To 6.92° | ||||||||
| With -20 To 20° Wheel Lock | 6.73° | 6.23 To 7.23° | ||||||||
| Front Wheel Displacement | 0° | -.25 To .25° | ||||||||
| Rear Geometrical Axis Deviation | 0° | -.2 To .2° | ||||||||
| Maximum Wheel Lock | ||||||||||
| Inside Wheel | About 34.3° | N/A | ||||||||
| Outside Wheel | About 38.6° | N/A | ||||||||
|
||||||||||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.